background image

2

Important Safety Information

FDR3590 Rear Discharge Grooming Mowers   310-229M

12/10/07

Land Pride

Table of Contents

Transport
Machinery Safely

Comply with state and local laws.

Maximum transport speed for

implement is 20 mph. DO NOT
EXCEED. Never travel at a speed
which does not allow adequate
control of steering and stopping.
Some rough terrain require a
slower speed.

Sudden braking can cause a

towed load to swerve and upset.

Reduce speed if towed load is not
equipped with brakes.

Use the following maximum

speed - tow load weight ratios as
a guideline:

20 mph when weight is less
than or equal to the weight of
tractor.
10 mph when weight is double
the weight of tractor.

IMPORTANT: Do not tow a load that

is more than double the weight of
tractor.

Use Safety
Lights and Devices

Slow moving tractors, self-

propelled equipment, and towed
implements can create a hazard
when driven on public roads. They
are difficult to see, especially at
night.

Flashing warning lights and turn

signals are recommended
whenever driving on public roads.
Use lights and devices provided
with implement.

Keep Riders
Off Machinery

Riders obstruct the operator’s

view they could be struck by
foreign objects or thrown from the
machine.

Never allow children to operate

equipment.

These are common practices that may or may not be applicable to the products described in
this manual.

Practice Safe Maintenance

Understand procedure before

doing work. Use proper tools and
equipment, refer to Operator’s
Manual for additional information.

Work in a clean dry area.

Lower the implement to the

ground, put tractor in park, turn off
engine, and remove key before
performing maintenance.

Allow implement to cool

completely.

Do not grease or oil implement

while it is in operation.

Inspect all parts. Make sure parts

are in good condition & installed
properly.

Remove buildup of grease, oil or

debris.

Remove all tools and unused

parts from implement before
operation.

Summary of Contents for FDR3590































Reviews: