Section 2: Operating Procedures
GB2590, GB2596, GB25108, GBE2590, GBE2596, & GBE25108 Grapple Buckets 380-192M
3/3/20
24
Unhook From Quick Attach Hitch Plate
Refer to Figure 2-6:
WARNING
!
To avoid serious injury or death:
Park bucket with grapple tines pointing down and grapple
hydraulic cylinders fully extended.
on page 27 if parking
bucket for long periods.
2. Shut tractor down before dismounting. Refer to
3. Disconnect customer supplied hydraulic hoses from
the tractor and store hoses on the bucket.
4. Pull front loader lock handles up to remove pins from
the bottom slots in the bucket hitch plate.
5. Return to the tractor
and raise bucket up
10" (25.4 cm).
6. Tilt front of bucket
down 5 to 10 degrees below
horizontal and lower bucket until cutting edge is
touching the ground.
7.
Slowly lower bucket hitch plate until top angle bars
and loader hitch plate have separated.
8. Slowly back tractor away from the bucket while
making sure the front loader does not interfere with
the bucket hitch plate and hydraulic hoses.
Unhook From Quick Attach Hitch Plate (Shown with Grapple Attached)
Figure 2-6
39290
