Section 7: Lubrication and Fluids
4400EX Heavy Duty Off Road Utility Vehicle 720-051M
7/14/08
36
Table of Contents
Pillow Block Bearing
Refer to Figure 7-13
The Pillow block bearing is located along side the left side
of the engine below the fuel filter.
•
Grease every 100 hours of operation
•
Type of Grease: Multipurpose
•
Quantity: 3 or 4 pumps of the grease gun.
Stop adding grease if lubricant emerges through the
seals.
Rotating Bearing Surfaces
Refer to Figure 7-14 and Figure 7-15
The swivel tube is located in the rear frame (See
Figure 7-14).
The shift selector vertical pivot is located along the left
side of the transmission (See Figure 7-15).
•
Grease daily before putting into service
•
Type of Grease: Multipurpose
•
Quantity: Grease until lubricant emerges from one end
of the bushing.
100 hrs
Daily
Figure 7-13
Figure 7-14
Figure 7-15
21352
21356
21357
