background image

Section 3: Operating Instructions 

Table of Contents

PD10, PD15, PD25 & PD35 Post Hole Diggers 317-048M

8/9/19

20

Section 3: Operating Instructions

Operator’s Responsibilities

Hazard control and accident prevention are dependent 
upon the awareness, concern, prudence, and proper 
training involved in the operation, transport, storage, and 
maintenance of the blade. Therefore, it is absolutely 
essential that no one operates the Post Hole Digger 
unless they are age 16 or older and have read, fully 
understood, and are totally familiar with the Operator’s 
Manual. 

Perform the following inspections before using your 
Post Hole Digger.

DANGER

!

To avoid serious injury or death:  

Make sure the site is free from hazards before drilling. Look 

for obstacles on the ground, beneath mulching, and below 
the ground that may need to be removed such as landscape 
fabric, wire, etc. Hand digging may be necessary to verify 
the presence of underground materials.

Do not drill through landscape fabric. Prior to drilling, cut 

a hole in the fabric sufficiently larger than the diameter of 
the auger to prevent auger entanglement with the fabric. 
Fabric caught in the auger can pull a bystander into the 
auger.

Keep others away from the post hole digger while the auger 

is rotating. A person can become entangled in the auger or 
hit by the auger if it swings erratically. Anyone helping 
should be kept a safe distance (a minimum of 10 feet or 3 
meters) from the unit while it is rotating.

Keep bystanders 10 ft (3 meters) or more away from the 

auger while operating the power machine. A person can 
become entangled in the auger, electrocuted if auger 
encounters an underground electrical line, and/or inhale 
harmful dust particles such as silica dust.

Operating Checklist

Check

Page

Read and follow all safety rules carefully. 
Refer to “Important Safety Information”.

1

Make sure all guards and shields are
in place. Refer to “Important Safety Information”.

1

Read and follow assembly & hook-up
instructions.
Refer to “Section 1: Assembly & Set-up”.

13

Read and make all required adjustments. 
Refer to “Section 2: Adjustments”.

19

Read and follow all operating procedures. 
Refer to “Section 3: Operating Instructions”.

20

Read and follow all maintenance instructions. 
Refer to “Section 5: Maintenance & Lubrication”.

35

Read and follow all Lubrication Instructions. 
Refer to “Lubrication Points”.

37

Make sure all gearboxes are properly lubricated. 
Refer to Gearbox lubrication.

37

Check digger initially and periodically for loose 
bolts and pins. Refer to “Torque Values Chart”.

43

A crushing hazard exists while hooking-up and unhooking 

implement. Keep people and animals away while backing-
up to implement or pulling away from implement. Do not 
operate hydraulic controls while a person or animal is 
directly behind the power machine or near the implement.

Do not remove spoil-pile with hand tools while auger is 

operating. Doing so can result in serious injury or death.

Do not allow anyone to manually guide the auger bit to 

position its point on the ground while it is rotating. A person 
will become entangled in the auger or hit by the auger.

Tractor power take-off shaft shield, driveline shields, and 

gearbox shaft shields must be installed and in good working 
condition to avoid driveline entanglement and projectiles 
flying off of the driveline.

Keep all persons away from the post hole digger while 

lowering and raising the unit. A person can be hit, pinched, 
or crushed by the unit.

Do not allow anyone to manually push down on the post 

hole digger, or put anything or anyone on the unit for the 
purpose of adding weight to the unit. Objects and people 
can be thrown, pinched, or entangled in the unit.

Do not use a power take-off adapter. The adapter will 

increase strain on the tractor’s power take-off shaft causing 
possible damage to shaft and driveline. It will also defeat 
the purpose of the tractor’s power take-off shield.

WARNING

!

To avoid serious injury or death:  

Allow only persons to operate this implement who have 

fully read and comprehended this manual, who have been 
properly trained in the safe operation of this implement, and 
who are age 16 or older. Serious injury or death can result 
from the inability to read, understand, and follow 
instructions provided in this manual.

Never carry riders on the implement or tractor. Riders can 

obstruct the operator’s view, interfere with controls, be 
pinched by moving components, become entangled in 
rotating components, struck by objects, thrown about, fall 
off and be run over, etc.

Never work near utilities such as gas lines, electrical lines, 

or other hazards that can cause serious injury or death from 
electrocution, explosion, or fire.

Never make contact with underground utilities such as 

electrical power lines, gas lines, phone lines, etc. They can 
cause serious injury or death from electrocution, explosion, 
or fire. If in doubt, call 811 (USA) before digging so that 
they can mark the location of underground services in the 
area. For contact information, see Dig Safe in the 
“Important Safety Information” starting on page 1.

Keep post hole digger properly attached to the tractor when 

in use.

Make sure the implement does not block the tractor’s Slow 

Moving (SMV) sign when transporting on a public road. If 
operators in vehicles approaching from the back cannot 
easily see the sign, then move it on the tractor to where it is 
visible to warn of your presence.

Summary of Contents for PD15 Series



















































Reviews: