Introduction
RCFM4014 Rotary Cutter 326-730M
12/11/18
11
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
37154
Land Pride welcomes you to the growing family of new
product owners. This Rotary Cutter has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this Rotary Cutter.
Application
The heavy duty RCFM4014 Rotary Cutters are designed
and built by Land Pride to provide excellent cutting
performance on gently sloping or slightly contoured right-
of-ways, pastures, set-aside-acres, or row crop fields.
Its 14 foot cutting width, 2" to 12" cutting height, and
ability to cut weeds and brush up to 3" in diameter make
it well suited for these applications.
The RCFM4014 cutter is designed for attaching to a
minimum 80 hp tractor with a Cat. ll & lll 3-point hitch and
1000 rpm power take-off shaft. The drivelines and
gearboxes are protected with a slip clutch on the main
driveline and spring-loaded torque dampener on the
outboard drivelines. Safety guards around the cutter are
offered in rubber or chain on the front and metal band,
rubber or chain on the back.
This cutter can be purchased with an option to include
cutting blades bolted to a dish pan for cutting grass,
weeds, and brush or with blade bar and shredder kit
option for shredding all widths of row crops into small
pieces. Fixed blades can also be added to the blade bar
and shredder kit option for shredding row crops in 30" row
widths or 38" to 40" row widths to reduce stalks into even
smaller pieces.
See
“Specifications & Capacities”
“Features & Benefits”
on page 47 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
NOTE:
A special point of information that the
operator should be aware of before continuing.
