Section 7: Features & Benefits
SBD3596 & SBD35108 Snow Blowers 370-347M
4/9/21
40
Section 7: Features & Benefits
SBD3596 & SBD35108 Models
Features
Benefits
Quality heavy-duty gearbox
Durable construction provides long life.
Two position hitch vertically
Helps reduce driveline angularity issues when raising the 3 Point arms up.
Allows lower 3 point arms to be positioned more parallel to the ground when in operation.
Top holes in lower clevis make the units quick hitch compatible.
Adjustable hitch horizontally
Hitch can be extended forward for standard 540 rpm without Quick Hitch.
Hitch can be adjusted back for standard 540 rpm with Quick Hitch.
Hitch can be extended forward for optional 1000 rpm gearbox without Quick Hitch.
Hitch can be adjusted back for optional 1000 rpm gearbox with Quick Hitch.
Large main housing with dual
augers
Dual augers are capable of making 40" (102 cm) high cuts through large snow drifts.
2 1/2" x 3/8" Auger flight
Auger is built heavy-duty to handle heavy work.
Large impeller diameter
Has the ability to move and throw large amounts of material farther.
Hard steel bolt-on reversible
grader blade
Bolt-on blade can be replaced before auger housing becomes exposed to wear. Hardened
steel blades last longer and because the blade is reversible, it can be flipped over to double
the blade’s life.
Hydraulically gear driven
chute rotator
Gives the operator the ability to change direction snow is being blown using a hydraulic
control lever, without having to get out of the cab.
Shearbolt protected gearbox,
drive shaft, impeller, and
auger
Eliminates costly repairs.
Greaseable bearings
Less drag and extends life of unit.
Skid shoe wear surfaces are
constructed of AR400 steel
AR400 steel last longer than mild steel.
Skid shoes are replaceable
Bolt-on skid shoes can be replaced before auger side plates become exposed to wear.
Skid shoes and adjustable
They can be adjusted to carry the Snow Blower above loose gravel and crushed rock or set
to remove snow close to surfaces such as asphalt and concrete.
Options
Two skid shoe options
Multiple surfaces allows you to pick the correct skid shoe for your application.
Hydraulically controlled
deflector
Gives the operator the ability to change distance snow is being blown from the discharge
chute using a hydraulic control lever, without having to get out of the cab.
