Important Safety Information
STH1590 Spike Tooth Harrow 322-314M
5/9/19
6
Safety Labels
Your Spike Tooth Harrow comes equipped with all safety labels
in place. They were designed to help you safely operate your
implement. Read and follow their directions.
1.
Keep all safety labels clean and legible.
2.
Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3.
Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
818-719C
Caution: Prevent Injury
33051
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4.
Refer to this section for proper label placement.
To install new labels:
a.
Clean surface area where label is to be placed.
b.
Spray soapy water onto the cleaned area.
c.
Peel backing from label and press label firmly onto the
surface.
d.
Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
Important Safety Information