Installation Guide
Part A
Page 2
Installation Guide
Part A
Page 2
A1
ABOUT THE
FTI 6
The
FTI 6
Thermal Imager can be used for creating thermal images and
measuring temperature in a wide variety of applications. It is designed to be
used either as a peremanently installed instrument or a portable unit. A range
of accessories are available to provide power, control, mounting and
environemntal protection. The
FTI 6
can be controlled from an IBM compatible
PC running
LIPS
software, or as a self contained instrument controlled by a
remote control unit, with a TV monitor.
Fig. A1 LAND
FTI 6
Thermal Imager
The
FTI 6
Thermal Imager is supplied with the following components:
16MB Memory card
Video Cable
S-VHS Video Cable
FTI 6
Control options:
1.
LIPS Software.
2.
Remote control unit and RS232 cable.
NOTE
A 625 line (PAL) or 525 line (NSTC) TV monitor is required with
option ‘2’. It must be capably of receiving Composite video 1V peak
to peak or SVHS 1V peak to peak chrominance and luminance
signal.
A1
ABOUT THE
FTI 6
The
FTI 6
Thermal Imager can be used for creating thermal images and
measuring temperature in a wide variety of applications. It is designed to be
used either as a peremanently installed instrument or a portable unit. A range
of accessories are available to provide power, control, mounting and
environemntal protection. The
FTI 6
can be controlled from an IBM compatible
PC running
LIPS
software, or as a self contained instrument controlled by a
remote control unit, with a TV monitor.
Fig. A1 LAND
FTI 6
Thermal Imager
The
FTI 6
Thermal Imager is supplied with the following components:
16MB Memory card
Video Cable
S-VHS Video Cable
FTI 6
Control options:
1.
LIPS Software.
2.
Remote control unit and RS232 cable.
NOTE
A 625 line (PAL) or 525 line (NSTC) TV monitor is required with
option ‘2’. It must be capably of receiving Composite video 1V peak
to peak or SVHS 1V peak to peak chrominance and luminance
signal.