background image

Model Number ______________________________

Serial Number ______________________________

Date of Purchase ___________________________
The model and serial numbers will be found on a decal attached to 
the pressure washer frame. You should record both serial number 
and date of purchase and keep in a safe place for future reference.

CONTENTS

2

9.801-316.0 • Landa ECOS 7000 Operator Manual • Rev. 12/12

Introduction .............................................................................................. 3
TRAILER INFORMATION
Machine Safety ........................................................................................ 3
Reporting Safety Defects ......................................................................... 3
Checklist, Before Your First Trip ............................................................... 3
What to Check & How to Check ............................................................3-5
Brakes ...................................................................................................5-6
Towing Instruction .................................................................................... 6
Trailer Storage ......................................................................................6-7
SAFETY INFORMATION
Warnings ...............................................................................................8-9
ASSEMBLY AND OPERATION
Pre-Operation Check ............................................................................. 10
Set-Up Procedures ................................................................................ 11
Component Identification ....................................................................... 12
Assembly Instructions ............................................................................ 13
Battery Installation ................................................................................. 13
Pressure Washer Instructions ................................................................ 14
Detergent Instructions ........................................................................... 15
Heat Exchanger Box Maintenance ........................................................ 15
Vacuum Operation Instructions .........................................................16-17
Filter Replacement ................................................................................. 17
Valve Operation ..................................................................................... 18
Tongue Assembly Instructions ............................................................... 19
Drain Instructions ................................................................................... 19
Troubleshooting ................................................................................20-22
Maintenance & Service .....................................................................23-26
Preventive Maintenance ...................................................................27-28
Warranty ................................................................................................ 29

Summary of Contents for ECOS 7000































Reviews: