background image

9.801-316.0 • Landa ECOS 7000 Operator Manual • Rev. 12/12

OPERA

TOR’S MANU

AL    

ECOS 7000

8

IMPORTANT PRESSURE WASHER SAFETY INFORMATION

CAUTION: To reduce the risk of 
injury, read operating instruc-
tions carefully before using.

1.    Read the owner's manual 

thoroughly. Failure to follow 
instructions could cause mal-
function of the machine and 
result in death, serious body 
injury and/or property  dam-
age.

2.   Know how to stop the machine and bleed pressure 

quickly. Be thoroughly familiar with the controls.

3.    Stay alert

 watch what you are doing.

WARNING: Keep wand, hose 
and water spray away from 
electric wiring or fatal electric 
shock may result.

4.   All installations must comply 

with local codes. Contact 
your electrician, plumber, 
utility company or the selling 
distributor for specific details. 

WA R N I N G :  T h i s   m a c h i n e  
exceeds 85 db appropriate ear 
protection must be worn.

WARNING: High pressure spray 
can cause paint chips or other 
particles to become airborne 
and fly at high speeds. To avoid 
personal injury, eye, hand and 
foot safety devices must be 
worn.

5.    Eye, hand, and foot protection 

must be worn when using this 
equipment.

6.    Keep operating area clear of all persons. 

WARNING: Flammable liquids 
can crate fumes which can  
ignite, causing property damage 
or severe injury.
WARNING: Risk of explosion — 
Operate only where open flame 
or torch is permitted.

WARNING

READ OPERATOR’S  

MANUAL THOROUGH-

LY PRIOR TO USE.

CAUTION

WARNING

RISK OF  

ASPHYXIATION.  

USE ONLY IN A WELL  

VENTILATED AREA.

CAUTION

HOT SURFACES  

CAN  CAUSE  BURNS.

CAUTION

WARNING

RISK OF FIRE.  

DO NOT ADD FUEL 

WHEN OPERATING 

MACHINE.

WARNING

PROTECTIVE 

EYEWEAR AND 

CLOTHING MUST  

BE WORN.

WARNING

HIGH PRESSURE 

SPRAY CAN PIERCE 

SKIN AND TISSUES.

CAUTION

WARNING

KEEP WATER SPRAY 

AWAY FROM  

ELECTRICAL WIRING.

WARNING

OPERATE ONLY 

WHEN  BELT 

GUARD IS IN PLACE.

WARNING

EAR PROTECTION 

MUST BE WORN

WARNING

USE PROTECTIVE  

EYE WEAR 

AND CLOTHING  

WHEN OPERATING 

THIS EQUIPMENT.

RISK OF EXPLOSION: 

DO NOT SPRAY  

FLAMMABLE LIQUIDS.

WARNING

WARNING

READ OPERATOR’S  

MANUAL THOROUGH-

LY PRIOR TO USE.

CAUTION

WARNING

RISK OF  

ASPHYXIATION.  

USE ONLY IN A WELL  

VENTILATED AREA.

CAUTION

HOT SURFACES  

CAN  CAUSE  BURNS.

CAUTION

WARNING

RISK OF FIRE.  

DO NOT ADD FUEL 

WHEN OPERATING 

MACHINE.

WARNING

PROTECTIVE 

EYEWEAR AND 

CLOTHING MUST  

BE WORN.

WARNING

HIGH PRESSURE 

SPRAY CAN PIERCE 

SKIN AND TISSUES.

CAUTION

WARNING

KEEP WATER SPRAY 

AWAY FROM  

ELECTRICAL WIRING.

WARNING

OPERATE ONLY 

WHEN  BELT 

GUARD IS IN PLACE.

WARNING

READ OPERATOR’S  

MANUAL THOROUGH-

LY PRIOR TO USE.

CAUTION

WARNING

RISK OF  

ASPHYXIATION.  

USE ONLY IN A WELL  

VENTILATED AREA.

CAUTION

HOT SURFACES  

CAN  CAUSE  BURNS.

CAUTION

WARNING

RISK OF FIRE.  

DO NOT ADD FUEL 

WHEN OPERATING 

MACHINE.

WARNING

PROTECTIVE 

EYEWEAR AND 

CLOTHING MUST  

BE WORN.

WARNING

HIGH PRESSURE 

SPRAY CAN PIERCE 

SKIN AND TISSUES.

CAUTION

WARNING

KEEP WATER SPRAY 

AWAY FROM  

ELECTRICAL WIRING.

WARNING

OPERATE ONLY 

WHEN  BELT 

GUARD IS IN PLACE.

READ OPERATOR’S 

MANUAL THOROUGHLY 

PRIOR TO USE.

WARNING: Risk of fire— Do not 
add fuel when the product is    
operating or still hot.
WARNING: Do not use gasoline 
crankcase draining or oil con-
taining gasoline, solvents or 
alcohol. Doing so will result in 
fire and / or explosion. 

WARNING: Risk of fire— Do not Spray flammable 
liquids.
7.   Allow engine to cool for 1-2 minutes before refu-

eling. If any fuel is spilled, make sure the area is 
dry before testing the spark plug or starting the 
engine. ( Fire and/or explosion may occur if this is 
not  done.)   

 

 

 

                                                                                                                                                 

Gasoline engines on mobile or portable equipment 
shall be refueled:    

 

 

 

a. 

 

Outdoors; 

    

b.   With the engine on the equipment stopped; 
c.   With no source of ignition within 10 feet of  
 

the dispensing point; and 

 

 

d.   With an allowance made for expansion of fuel  
 

should the equipment be exposed to a higher  

 

ambient temperature.   

 

In an overfilling situation, additional precautions are 
necessary to ensure that the situation is handled in a 
safe manner.
WARNING: Risk of injury. Disconnect battery 
ground terminal before servicing.
8.    When in use, do not place machine near flammable 

objects as the engine is hot.

9.   Oil burning appliances shall be installed only in 

locations where combustible dusts and flammable 
gases or vapors are not present. Do not store or 
use gasoline near this machine.

10.   Use No. 1 or No. 2 heating oil (ASTM D306) only. 

NEVER use gasoline in your fuel oil tank. Gasoline 
is more combustible than fuel oil and could result 
in a serious explosion. 

NEVER use crankcase or 

waste oil in your burner. Fuel unit malfunction could 
result from contamination.

11.  Do not confuse gasoline and fuel oil tanks. Keep 

proper fuel in proper tank.

WARNING: Risk of injury. Hot 
surfaces can cause burns. Use 
only designated gripping areas 
of gun and wand. Do not place 
hands or feet on non-insulated 
areas of the pressure washer.

Summary of Contents for ECOS 7000































Reviews: