background image

 

 

This

 

document

 

is

 

the

 

property

 

of

 

LANDI.

 

Its

 

content

 

cannot

 

be

 

reproduced

 

or

 

divulged

 

without

 

the company’s

 

written

 

approval.

 

   

4

 

/

 

18

 

Plastic Bags Statement 

 
 
 

z

 

The installation and connection of this product must strictly observe the related instructions on the instruction. The devices 
should be connected to stable electric socket, whose ground wire should be connected to the ground, and the socket should 
not be in the same circuit with photocopier or air conditioner which is switched often. 

z

 

In no event shall LANDI be liable for any data or revenue loss, or consequential, indirect, punitive, special or incidental 
damages resulting from any reasons. 

z

 

Use only specified power supply, to avoid failure caused by mismatching. 

z

 

Stop using the device immediately in case of power wire damaged, and notice related customer service department for help in 
time. 

z

 

It should be prohibited that any liquid is fallen onto, or any conductive substances (eg. pin, tack, wire etc) are precipitated 
into this electrical device; otherwise short circuit may occur to damage the device.  

z

 

Do not press the device or place anything onto the device 

z

 

Do not vibrate, shake or forcibly beat the device. 

z

 

Never place the device in the environment with high temperature, humidity, dust or electromagnetic field. 

z

 

Do not plug any part of the device or external devices in power-on status, which may damage the interior circuit. It should be 
noticed that the switch of the device must be powered off prior to power dump 

z

 

To avoid accidental fire, do not use or store any flammable spay, coatings, paintings etc. at the vicinity of the device. 

z

 

Shut off the power immediately under malfunction. Please contact our customer service department timely and do not 
privately open the product for maintenance without permission. 

z

 

The terminal power must be switched off to avoid lightning strike in thunderstorm weather. 

z

 

When POS is being attacked (eg. casing is opened), the sensitive information stored inside the device will be erased 
immediately. To avoid unexpected trouble, please do not open the casing at random.  

z

 

When POS is under attack, device LCD screen will prompt the warning, together with beep. In this case, please contact our 
customer service department for further help. 

z

 

Power off the terminal in the airplane in accordance with the provisions of civil aviation. 

z

 

Usages notes under inflammable, explosive situations: 
Take appropriate measures to prevent from possible explosion while using the device with WCDMA or other wireless 
configurations under flammable and explosive occasions; or, use the device with corresponding explosion-proof label. 

z

 

Usages notes under medical occasions: 
Device with WCDMA or other wireless configurations may cause interference to some medical electronic equipment. It is not 
allowed to use such device in the vicinity of patient with pacemakers. 

 

Instruction Symbols 

 

  

       

WARNING 

This prompt means improper operation may result in device damage. 

 

         

NOTE 

This prompt stands for the important information that should be paid attention to during 
operation process.

  

 

Standard Compliance 

1.1

 

EC standard compliance marking

 

EC standard compliance marking certifies that the products stipulated below:  
E8XX 

z

 

Complies with the basic requirements of European Directive 1995/5/CE, known as the <R&TTE Directive> concerning RF 
equipment and telecommunications terminals with respect to: 

-

 

Health and safety protection of the user and all other persons 

-

 

EMC protection 

z

 

Conforms to the following harmonized standards: 

-

 

IEC/EC 60950-1: Electrical safety of data processing equipment including electrical office equipment. Issue Dec. 2001 

-

 

EN55022: Data processing equipment – Radioelectric disturbance characteristics- Limits and measurement methods. 

Issue 1998/A1 -2000/A2 -2003 

-

 

EN55024: Data processing equipment – Immunity characteristic –Limits and measurement methods. Issue 1998 + A1-

2001 +A2 -2003 

z

 

Complies with the following specification: 

-

 

ETSI ES 203201: Harmonized basic attachment requirements for Terminals for connection to analogue interfaces of the 

Telephone Networks. 

Danger

 

-

 

Place the plastic bags out of reach of children to avoid danger of suffocation. 

Summary of Contents for E830



















Reviews: