Installation
26
9. Install cup holder assembly over upright mounting plate.
Ensure main harness is routed to center of console access
hole. Secure with (6) M5x15 Phillips cross head screws to
underside of mounting plate.
Figure 2-8. Installing Cup Holder Assembly
10. Attach contact heart rate bar assembly to bottom of upright
mounting plate. Feed wires up through mounting plate, care
should be taken to ensure wires are not pinched between
mounting plate and CHR bar once installed. Secure with
(4) M8x55 Black Hex Head Bolts, (4) M8 Black Spring/Lock
Washers, and (4) M8 Black Flat Washers.
Figure 2-9. Attaching Contact Heart Rate Bar Assembly
Cup Holder Assembly
M5x15 Phillips
Cross Head
Screw
Contact Heart Rate
Bar Assembly
M8 Flat Washer
M8 Spring/Lock
Washer
M8x55
Hex Head Bolt
Black
Summary of Contents for 90 E7
Page 1: ...Part Number 95001 6 E7 E9 90 Series Elliptical Owner s Manual...
Page 12: ...Contents 12...
Page 62: ...Operation Landice Achieve Control Panel 62...
Page 73: ......