Installation
Assembly
16
14. Loosely attach each Handrail to the Upright Bracket and the
Remote Console Assembly End Plates with M8x15 Socket Head
Cap Screws and Lock Washers. Tighten all Screws that secure the
Remote Console Assembly to the Upright (6 per side, Figure 2-17).
Figure 2-17. Handrail Mounting Hardware
15. Install both Handrail Inner Covers with M5x15 Socket Head Cap
Screws (3 each side, previously removed in Figure 2-16) using
4mm Allen wrench.
16. Place the Accessory Tray over the Handrails and remove the
Accessories Cover. Ensure that the Ribbon Cable is routed through
the Cable Notch as indicated by the red arrow. (Figure 2-18).
Upright Bracket
End Plate
M8x15 Socket
Head Cap Screw
(12X)