Installation
Leveling Treadmill
24
3. When the bubble is centered on the level, lock each leveling foot
into place by tightening the 19mm nut against the bottom of the
frame.
4. Plug the treadmill power cord into a dedicated power outlet. Ensure
that the power cord has plenty of slack and will not be pinched
beneath the treadmill as the treadmill elevates up and down.
5. Ensure the safety lanyard block is pushed in.
WARNING
Do not plug treadmill into a surge
suppressor or GFI outlet.
AVERTISSEMENT
Ne branchez pas le tapis roulant dans un
suppresseur de surtension ou une sortie GFCI.
CAUTION
DO NOT OVER-TIGHTEN or belt, rollers and
motor will be damaged.
ATTENTION
NE PAS SERRER OU NOIR, la ceinture, les
rouleaux et le moteur seront endommagés.