Elliptical Operation
40
3.5.2. Edit Mode
1. Press
PROGRAMS
to display the Programs selection
screen.
2. Scroll through the program
options by pressing
PROGRAMS
or use the
arrow keys. When USER
PROGRAM PREVIEW is
shown, press
ENTER
.The
User Program Preview
Screen displays the program overview and total program
time.
3. Press
ENTER
or wait 3 seconds. The screen displays
PRESS START TO BEGIN OR ENTER TO EDIT.
4. Press
ENTER
. EDIT MODE
requires a time for segment
1 (area highlighted in white).
Note:
Pressing ENTER toggles between effort and time values
for the current segment. To change segments, press either
arrow. You can change segments in either the forward of
reverse direction.
5. Use the numeric keypad to change the value and press
ENTER
. Continue to another segment by pressing the
appropriate arrow key.
6. If you want a program to
have less than 20
segments, create the last
segment with 0 in the time
field. The time reads END.
The program ends when it
reaches this segment.
7. When you finish editing your User-Defined Program, you
can begin your program by pressing
START
.
