The Cardio Trainer is equipped with onboard self-diagnostics. If the elliptical experiences any errors during operation,
the elliptical will display the error message. You will have the option to further investigate by commencing the elliptical’s
self-diagnostics software (see picture below).
When you choose the option to enter diagnostics you will be prompted with
a warning screen (shown below). After reading it, straddle the elliptical by
stepping on the traction strips on the sides of the running surface and press
ENTER
.
The elliptical will now systematically test all of the individual components of
the elliptical. During some of its tests, it will prompt you with simple “Yes or
No” questions to assist with the diagnosis. Answer the questions using the
center “+/-” keys when prompted.
Once the Self-Diagnostics has completed all of the tests, it will read one of
the two messages along the bottom: “No Errors Detected”, or “Error
Detected, Contact Service Provider”.
Note: You can also manually enter self-diagnostics mode by pressing the center
“+”, “-”, and START at the same time when the elliptical is off.
23
Self Diagnostics
