15
Appendix A: Medrail Installation (L8-L9)
Insert the side rail into the upper
rail clamp and tighten the bolt
using a 1/2” socket.
(Do not over-tighten.)
Fit the side rail to the bottom rail
clamp.
Use a soft mallet to firmly set the
rails inside the clamp.
Use a 3/16” allen wrench to tighten
the rail clamp bolts.
Line up the upright leg side covers
and firmly snap them into place.
Place the plastic endcaps on the
top corners of the control panel.
Use the two small Phillips head
screws included to secure the
endcaps.
(Return to step 9 in assembly
instructions)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Summary of Contents for Pro Sports Trainer
Page 23: ......
