8
After making adjustments, remove all wrenches and
other tools before operating the Sander.
Use extra caution when starting the Sander for the first
time after installing a new tool or part.
MONTHLY MAINTENANCE
1.
Check the rubber sanding wheel surface for any accumulation of
dust. Clean if necessary. Replace the wheel if worn.
2.
V-Belts – Check tension and adjust if necessary.
3.
Check for proper opening and closing of all dust dampers,
removing and cleaning any accumulation around the openings.
LUBRICATION
Your Landis Sander is equipped with sealed bearings throughout, which
should be replaced if they ever wear out.
Other parts should not require any lubrication, only cleaning the parts is
required.
Lubrication will only attract dust and would be more harmful than helpful.
V-BELT ADJUSTMENT AND REMOVAL
The V-Belt on the Landis Sander should be checked monthly for proper
tension and general condition. Loose V-Belt will decrease the power
available to the various tools and lower the efficiency of your Sander.
If you discover a worn or frayed belt, replace it now so it won’t break at
an inconvenient time.
WARNING:
Disconnect electrical power supply before working on
the machine.
Summary of Contents for P-220
Page 1: ...P 220 ORTHO MOBILE MINI SANDER Operator Manual Manufactured by ...
Page 12: ...12 ...
Page 13: ...13 ...