OPERATING INSTRUCTIONS
3-9
Swing Out Outrigger Platform
Extension Set-Up
DANGER
1.
Use extension brackets to increase the platform
width to support wide loads.
2.
Lift up and rotate swing-out outriggers outward
3.
Place extension planks on outriggers.
WARNING
4.
Center the load on the trailer. DO NOT load to one
side. Position the load for proper weight distribution.
See
“Preparation for Loading and Unloading” on
for loading procedure.
WARNING
Do not operate if any extension is not locked in
place. Inspect all extensions to insure each is
locked securely in position.
1.
Top of extension planks must be flush with
main deck boards.
2.
Centerline of tracks or tires must be loaded
on the main deck, not on extension brackets.
3.
Failure to load extension brackets properly
can result in equipment damage and personal
injury.
1.
Do not overload extensions. overwidth
ratings are given in standard specifications.
2.
Do not secure load to overwidths or
undercarriage. Secure load frame to mounted
d-rings or gotchas located in the approach
plate and frame beam flanges. Failure to do
so may cause serious injury or death.
Summary of Contents for 855C HD Series
