2-1
Chapter 2
Standard Specifications
MODEL 855C/855 HD
CAPACITY*:
110,000 LB. DISTRIBUTED
110,000 LB. CONCENTRATED IN 12’
SWING OUT EXTENSION MAXIMUM CAPACITY IS ONE HALF FRAME CAPACITY LISTED ABOVE.
GOOSENECK:
12’-5” DUAL PIN SETTINGS W/ 7 POSITION FIFTH WHEEL RIDE HEIGHT
10’-9” STD ON 855-48CA MODELS
KING PIN SETTING:
10’-9” G/N = 15”; 12’-5” G/N DUAL PINS = 15” AND 33”
SWING CLEARANCE:
10’-9” G/N = 90”; 12’-5” G/N DUAL SWING = 108” AND 90”
LOADED GROUND CLEARANCE:
6-1/2”
LOADED DECK HEIGHT:
19-1/2”
TIRE SIZE:
255/70R22.5 LRH DOUBLE COIN
BRAKE SIZE:
16-1/2” X 7” FULL AIR W/ SPRING BRAKES ON THREE AXLES, ABS 4S/2M
ELECTRICAL HOOKUP:
7-WAY CONNECTOR
AIR HOOKUP:
COLOR CODED GLAD HANDS
HYDRAULIC HOOKUP:
QUICK COUPLERS
FLAT FACE 3/4” BODY SIZE
MAXIMUM OPERATING
PRESSURE**
2500 PSI
OPERATING FLOW
17 GPM
* CAPACITY RATINGS ARE FRAME CAPACITIES ONLY. ACTUAL LOAD CAPACITIES MAY BE RESTRICTED BY
FACTORS SUCH AS GROSS AXLE WEIGHT RATINGS (GAWR) OR STATE AND FEDERAL REGULATIONS. TIRE,
BRAKE, AXLE, OR WHEEL SELECTION MAY ALSO LIMIT CAPACITY.
** TRACTOR HYDRAULIC POWER SUPPLY MUST BE CAPABLE OF OPERATING AT THIS PRESSURE AND
FLOW RATE AND BE EQUIPPED WITH A PRESSURE RELIEF VALVE SET AT THIS PRESSURE.
Summary of Contents for 855C HD Series
