3-24
F-632-1218
ASSEMBLY INSTRUCTIONS
4 Row Coil Tine Harrow
Installation
for 4 Row Coil Tine Harrow
placement dimensions.
1.
Attach two coil tine harrow arms to 4 row coil tine
harrow assembly using u-bolts and 5/8-11 flange
head serrated nuts
2.
Install 1/2-13 x 1-1/4 round head square neck screws
through angle adjustment plate and gang bar plate
as shown in
Figure 3-19.
3.
Assemble 4 row coil tine harrow assembly arms to
the rear of the field cultivator frame using 5/8-11 x 5
hex head cap screws, harrow mounting plate, and
hex lock nuts
.
4.
Refer to the “4 Row Coil Tine Adjustments” in
Operation and Maintenance section for coil tine
adjustments
.
