SYMPTOM
PROBLEM: REMEDY
BRAKES PULL TO ONE SIDE
Wrong Magnet Lead Wire Color:
Correct.
Incorrect Adjustment:
Adjust.
Grease or Oil on Magnets or Linings:
Clean or re-
place .
Broken Wires:
Repair or replace.
Bad Connections
: Find and repair.
HARSH BRAKES
Underadjustment:
Adjust brakes.
Improper Synchronization:
Correct.
Improper Controller:
Change.
Faulty Controller:
Test and correct.
NOISY BRAKE
Underadjustment:
Adjust brakes.
Broken Brake Components:
Replace components.
Incorrect Brake Components:
Correct.
SURGING BRAKES
Grease or Oil on Magnets or Linings:
Clean or re-
place .
Out-of-Round Brake Drums:
Machine or replace.
Faulty Controller:
Test and correct.
DRAGGING BRAKES
Overadjustment:
Readjust
Out-of-Round Brake Drums:
Machine or replace.
Incorrect Brake Components:
Replace.
Loose, Bent, or Broken Brake Components:
Re-
place components.
Faulty Breakaway Switch
: Repair or replace.
Broken Wires:
Repair or replace.
Loose Wheel Bearing Adjustment:
Adjust.
Bent Spindle:
Replace axle.
5-4
SURGE HYDRAULIC BRAKES
For maintenance procedures,
see Section 4-6
.
SYMPTOM
PROBLEM: REMEDY
NO BRAKES
Severe Underadjustment:
Adjust brakes.
Broken Surge Brake Components:
Find and re-
place.
Broken Hydraulic Line:
Find and replace.
No Brake Fluid:
Fill per maintenance schedule.
Operation of Actuator Hampered:
Remove devices
or obstructions that prevent the actuator from being
free to telescope in response to braking require-
ments.
5-4
Summary of Contents for LT08 Series
