Press the On/Off button
for more than 5 seconds
If the indicator light flashes and
turns off, the controller works
well with the receiver.
Master
Receiver
Slave
Receiver
15m
15m
15m
Slave
Receiver
Slave
Receiver
One controller can control a lot
of receivers, the number of
receivers is not limited. If you
choose this mode, please follow
step2.
If you want
to
control
the
farther
products
,
you
can
use
master
and
salver
mode
. If you choose
this function
,
please go on with step2 and step3.
L&S 2.111.0008.01.01.00
B
A
Press the Test Button
1
2
3
Lamp
LED Driver
Receiver
Distributor
1
2
3
4
Connect System
AC Power
1
Match
the
Receiver
to
Controller
2
Press the Test Button for more than 5 seconds
1
2
The
Function
of
Master
Receiver
3
If the indicator light flashes
after 5 seconds, the controller
works well with the receiver
Set
Master
Receiver Function
After 5 seconds, the indicator light
turns off, the function of the Master
Receiver is cancelled.
Cancel
Master
Receiver Function
2
Memory Function
Notice: Memory function will take effect under the receiver working well at
least 60seconds while rotating the color wheel.
Sleeping
Function
The remote will go dormant after 60 seconds of inactivity.
Press any button to reactivate the remote.
Master
Receiver
Setting
Function
Notice: Only one master receiver is allowed in the wireless network.
If the slave receiver needs to be setted as master, it can be setted
according to the “Match the master receiver to transmitter”step and
the original master receiver should be powered on.
!
!
www.ls-light.com
