G200 Analyser Range
OMG200N1.23
©
Copyright 2010 Geotechnical Instruments (UK) Limited
Page
21
5.12.2 Utilities
The ‘Utilities’ option enables the operator to configure instrument settings prior to taking
readings.
1)
From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
2)
Press ‘Key 2’ to display the ‘Utilities’ menu and the following screen is displayed:
G210 Utilities Menu
"
Note: The ‘Utilities’ menu is the same for the G200 instrument with the exception
of ‘Option 6 – Logging’. This feature is not available on the G200
instrument.
5.12.2.1 Time & Date
The ‘Time & Date’ option enables the operator to check or set the instrument’s internal
clock. The current time/date are appended to every stored reading.
1)
From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
2)
Press ‘Key 2’ to display the ‘Utilities’ menu.
3)
Press ‘Key 1’ and the ‘Set Time & Date’ menu is displayed:
Set Time & Date
4)
Press ‘Key 1’ to change the time or press ‘Key 2’ to change the date. Type the
time or date using the numeric keypad followed by the ‘Enter’ key. The instrument
will not allow invalid times or dates to be entered.
"
Note: The clock will need to be manually adjusted to cope with daylight saving
changes or changes when crossing time zones.
5.12.2.2 Contrast
The ‘Contrast’ option enables the operator to adjust the instrument screen contrast to
compensate for changes in ambient temperature. The default setting is 0.
