G200 Analyser Range
OMG200N1.23
©
Copyright 2010 Geotechnical Instruments (UK) Limited
Page
29
5)
Select the ‘Accept’ button to confirm the filter selection.
5.12.4.3 Goto
The ‘Goto’ function enables the operator to view the first, last or specific number of
reading stored.
1)
From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
2)
Press ‘Key 4 - View Data’.
3)
To clear the readings press the soft-key ‘More’ followed by ‘Key 3 - Goto’.
4)
Select either ‘First’, ‘Last’ or ‘Num’. If ‘First’ or ‘Last’ is selected the appropriate data
will be displayed.
5)
If ‘Num’ is selected the operator is prompted to enter the data reading number
followed by the ‘Accept’ button to confirm the selection.
5.12.5 Diagnostics
The ‘Diagnostics’ option enables Geotech Technical Support to identify and resolve issues
with the instrument and readings. If required, the operator may be asked to confirm the
diagnostics displayed.
1)
From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
2)
Press ‘Key 5’ to view diagnostics.
"
Note: For further information contact Technical Support at Geotechnical
Instruments (UK) Limited on +44(0)1926 338111
or email
technical@geotech.co.uk
.
5.12.6 Monitor (G200 ONLY)
The ‘Monitor’ option enables the operator of a G200 instrument to choose from the
following three monitoring modes.
Monitor Mode
1)
From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
2)
Press ‘Key 6’ followed by the relevant option key to select the required monitoring
mode.
Person:
‘Person’ enables the operator to monitor in personal safety mode. This mode automatically
