Page A - 46
A
LW SC-300 E / LW SC-350 E
Version: 06.12.2022
M A I N T E N A N C E A N D S E R V I C E
Oil filter maintenance
Oil filter maintenance as follows:
• Loosen pipe connections
• Loosen mounting screws (Fig. 1) and remove oil filter
• Loosen mounting screws of the filter cover (Fig. 2).
• Change o-ring, previously grease new o-ring (Fig. 3)
• Loosen mounting nuts and remove filter washer (Fig. 4)
• Change sinter filter (Fig. 4).
• Place filter washer and washer (Fig. 5) and tighten nut.
• Place filter cover, fix and tighten mounting screws of the filter
cover (Fig. 2).
• Screw and tighten mounting screws of the oil filter (Fig. 1).
• Connect pipe connections and tighten.
The oil filter maintenance is now completed.
Fig. 1 - Loosen mounting screws
Fig. 3 - Change o-ring
Fig. 5 - Place filter washer and
washer
Fig. 4 - Change sinter filter
Caution
Oil filter housing is filled with oil. Take all necessary protection measures.
Fig. 2 - Loosen mounting screws of
the filter cover
Note
Clean all parts thoroughly before assembly.
i
!
Summary of Contents for SC-300 E
