General
For us, the long lifecycle and efficiency of your new equipment is a priority. To keep the brush cutter in top working
condition,read this manual carefully before using the equipment.
Never let anyone operate or maintain the device without reading this manual carefully! Always make sure that
safety precautions are observed in use and maintenance. Keep this manual for future reference and make sure to
hand it over to a new owner.
The cornerstones of the product development of LANDY attachments are quality, durability and economy. The
products are engineered to be high-performing, safe and durable in professional use. Any feedback on our
products is welcome and contributes to the further development of our products. If you have any questions about
the use or maintenance of the brush cutter, please contact us by e-mail: info@landyindus.com
The manufacturer reserves the right for structural and technical changes without prior notice. Therefore, some
pieces of information given in the manual may have changed after printing this manual.
Read before use
Make sure you know your equipment before you start using it.
Equipment may be operated only by an individual who is thoroughly familiar with its use.
All operators must be properly instructed before use and maintenance of the equipment. Use by individuals with
insufficient instructions may pose serious risks to the operators themselves, to the environment and the
equipment.
When coupling the attachment to the base machine, make sure:
- that all locking cotters are intact and in order
- there is no pressure in the hydraulic system
- that hydraulic hoses are intact
- there is no skin contact to hydraulic oil when connecting hydraulic hoses
- not to pull by the hydraulic hoses, but only by the hydraulic fitting
During operation, pay attention to:
- safe, appropriate travel speed
- other traffic, people and animals
- danger zones and objects that block your view
- children
NEVER use the machine, if there is someone in the danger zone.
NEVER go under the attachment.
Check all bolts, nuts and hydraulic fittings for tightness after the first day of operation!
If the equipment is not likely to be used for a longer period of time, clean it thoroughly after use and lubricate as
instructed.
