2° PASSAGE
1. Apply silicone in the groove of the an-
gle profile.
2. Insert the fixed glass inside the corner
profile and while fresh complete the
next step.
3. Install the glass stop gasket between
the glass and the aluminium corner
profile, taking care to insert it from
bottom to top.
You can find it rolled up in a sachet!
T E X A S 2 . 0
51
3° PASSAGE
1. Installing the fixed wall.
IMPORTANT
:
For correct installation, we recommend
removing the wall profile from the wall,
inserting it on the fixed glass wall and
then placing it on the plate; you will fix
the wall profile later.
PLEASE NOTE:
nothing goes under
the fixed plate, it must be placed and si-
liconed from the outside.
1
1
2
3
G
F
M