T E X A S 2 . 0
56
1
2
1
2
3
8° PASSAGE
1. Drill holes and attach the screw from
the inside to secure the shower wall to
both the wall and corner profiles using
the 8x16 screws.
IMPORTANT
:
maximum saloon door
adjustment 2 cm, fixed glass 2.5 cm.
Note:
A total of 6 holes must be drilled,
2 holes per profile, 1 at the top and 1 at
the bottom. The screws will be covered
with chrome-plated covers in the salo-
on door profiles.
2. Cover the wall profile of the fixed wall
with the aluminium cover to conceal
the fixing screws and to protect them
from water.
9° PASSAGE
1. Install the handles as shown in the figure
(screw hole on the inside).
2. Install the deco cover on top of the wall
profile.
3. Apply silicone as shown and wait 24
hours.
8*16
8*16
E