The Left and Right stereo mix are still available on the line outs should wish to connect
additional power amps and speakers.
Advanced
Set-up's
The flexible routing facilities on you Concept 10/16 allow advanced set-ups to be achieved.
The line outs/tape outs have a separate level control, this allows a slave amplifier to be
connected and its volume level be controlled from the your mixer. This slave amp could be
used for the connection of a subwoofers/active loudspeaker or speakers in another room.
The line outs always have the left and right masters on them this could enable you to still have
the main PA in stereo when mon to left amp is enabled ,provided you have an additional power
amp.
Finally................
Following this section follows more some quick set-up diagrams and more detailed information
about your Concept mixer's facilities.
Good
luck
with
your
mixing
!
Concept
Concept Manual
7