3
CONTROLS
DH40 FRONT PANEL
•
INPUT 1 JACK
o
Connect an external electronic drum/sound module. Uses 6.3mm jack
•
INPUT 2 JACK
o
Connect an external electronic drum/sound module. Uses 6.3mm jack
•
INPUT 1 LEVEL
o
Adjust the volume of the device
connected to input 1
•
INPUT 2 LEVEL
o
Adjust the volume of the device connected to input 2
•
BASS
o
Adjusts the low-end response of the signal. Turning it clockwise increases the amount of
bottom-end, giving you a fuller tone. As the amplifier is driven harder and louder you may
find the need to dial out a little bass to stop it getting muddy.
•
TREBLE
o
Adjusts the high frequency content of the signal. Turning it clockwise increases the
amount of top-end, giving your tone clarity and brightness. Turning it anti clockwise will
produce a warmer sound, ideal for smoother tones.
•
AUX IN
o
3.5mm stereo jack to connect a backing track to the mix from your audio playing device
such as .
•
HEADPHONES
o
3.5mm socket to connect a pair of headphones for silent practise. Make sure to initially
keep input levels low so as to not cause any hearing damage. Adjust levels accordingly to
a comfortable volume for listening.
•
POWER INDICATOR
o
LED that indicates the amplifier is powered up.
•
POWER SWITCH
o
Flick switch to turn on and off when power supply is plugged in to the supplied power
supply unit.
Summary of Contents for DRUMHUB DH40
Page 1: ...DH40 USER MANUAL ...
Page 8: ...7 DIMENSIONS in mm ...
