L Z B 1 2 3 4
8
7
6
5
4
3
1
12
REAR PANEL
Power inlet socket. Make sure the specified voltage is correct for your country!
This drawer contains the main safety fuse for the unit.
The mains fuse ratings are detailed on page 7 of this manual
Displays the model number, power requirements and serial number of the unit.
Connect your headphones here for silent practice. The internal and any extension loudspeakers are
automatically muted.
Connect an extension loudspeaker cabinet here, the internal loudspeaker remains connected. The
impedance of the extension cabinet must not be less than 8 Ohms. Connecting cabinets that have a lower
impedance than 8 Ohms will result in the amplifier overheating. Continual use in this manner may cause
permanent damage.
Line level FX Loop Return to connect back from an external effects controller.
Line level FX Loop Send to connect to an external effects controller.
Connect a dedicated Laney LV3Way footswitch here (included) to allow remote switching of the reverb
and channels. Drive channel must be enabled (with )
7
1
2
4
6
8
3
5
7
2
SUPPLY VOLTAGE & FUSE RATING
T2A L 250V
T1A L 250V
~115V
~220V/~230V
Summary of Contents for LV200
Page 1: ...200 ...
Page 8: ...8 ...
