Lang CLB-1-E, Installation, Operation, Maintenance, & Troubleshooting

4

IMPORTANT READ 

FIRST 

IMPORTANT

CAUTION:

THE BROILER WEIGHS 370 LBS. (167.83 kg).  FOR 
SAFE HANDLING, INSTALLER SHOULD OBTAIN 
HELP AS NEEDED, OR EMPLOY APPROPRIATE 
MATERIALS HANDLING EQUIPMENT (SUCH AS A 
FORKLIFT, DOLLY, OR PALLET JACK) TO REMOVE 
THE UNIT FROM THE SKID AND MOVE IT TO THE 
PLACE OF INSTALLATION.

CAUTION:

ANY STAND, COUNTER OR OTHER DEVICE ON 
WHICH BROILER WILL BE LOCATED MUST BE 
DESIGNED TO SUPPORT THE WEIGHT OF THE 
BROILER (370 LBS.). 

CAUTION:

SHIPPING STRAPS ARE UNDER TENSION AND CAN 
SNAP BACK WHEN CUT. 

DANGER:

THIS APPLIANCE MUST BE GROUNDED AT THE 
TERMINAL PROVIDED.  FAILURE TO GROUND THE 
APPLIANCE COULD RESULT IN ELECTROCUTION 
AND DEATH. 

WARNING:

INSTALLATION OF THE UNIT MUST BE DONE BY 
PERSONNEL QUALIFIED TO WORK WITH 
ELECTRICITY.  IMPROPER INSTALLATION CAN 
CAUSE INJURY TO PERSONNEL AND/OR DAMAGE 
TO EQUIPMENT.  UNIT MUST BE INSTALLED IN 
ACCORDANCE WITH ALL APPLICABLE CODES. 

NOTICE: 

The data plate is located behind the access cover to 
the right of the unit.  The broiler voltage, wattage, 
serial number, wire size, and clearance specifications 
are on the data plate.  This information should be 
carefully read and understood before proceeding 
with the installation. 

NOTICE:

The installation of any components such as a vent 
hood, grease extractors, fire extinguisher systems, 
must conform to their applicable National, State and 
locally recognized installation standards.

CAUTION:

ALWAYS KEEP THE AREA NEAR THE APPLIANCE 
FREE FROM COMBUSTIBLE MATERIALS. 

CAUTION:

KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN 
AND DRY.  IF SPILLS OCCUR, CLEAN IMMEDIATELY, 
TO AVOID THE DANGER OF SLIPS OR FALLS.