Lang CLB-1L-L, Installation, Operation, Maintenance, & Troubleshooting

6

UNPACKING 

3.1 Receiving the Broiler 

Upon receipt, check for freight damage, both visible and concealed.  Visible 
damage should be noted on the freight bill at the time of delivery and signed by the 
carrier's agent.  Concealed loss or damage means loss or damage, which does not 
become apparent until the merchandise has been unpacked.  If concealed loss or 
damage is discovered upon unpacking, make a written request for inspection by the 
carrier's agent within 15 days of delivery.  All packing material should be kept for 
inspection.  Do not return damaged merchandise to Lang Manufacturing Company.  
File your claim with the carrier. 

3.2 Location 

Prior to un-crating, move the broiler as near its intended location as practical.  The 
crating will help protect the unit from the physical damage normally associated 
with moving it through hallways and doorways. 

3.3 Un-crating 

The broiler is packaged on a pallet, wrapped in plastic to protect from moisture and 
surrounded by a wooden frame.  Remove the wood crating carefully.  Improper use of 
tools can result in damage to the equipment.  Remove and discard plastic wrap. Remove 
and discard desiccant bags placed inside broiler cavity.  
The broiler rack frame and rack are secured for shipping purposes and for safety, and 
should remain secured until unit is at its final location. 
Legs, where applicable, are packed inside broiler cavity or cabinet base and should 
remain there until unit is at the final installation location. 
The unit can be safely lifted from bottom with forklift or straps. Use extreme care and 
follow proper safety procedure regardless of method used and be aware of gravity 
center, especially with banks of multiple units.

CAUTION:

THE BROILER WEIGHS 370 LBS. (167.83 kg).  FOR 
SAFE HANDLING, INSTALLER SHOULD OBTAIN HELP 
AS NEEDED, OR EMPLOY APPROPRIATE MATERIALS 
HANDLING EQUIPMENT (SUCH AS A FORKLIFT, 
DOLLY, OR PALLET JACK) TO REMOVE THE UNIT 
FROM THE SKID AND MOVE IT TO THE PLACE OF 
INSTALLATION.

CAUTION:

ANY STAND, COUNTER OR OTHER DEVICE ON WHICH 
BROILER WILL BE LOCATED MUST BE DESIGNED TO 
SUPPORT THE WEIGHT OF THE BROILER (370 LBS.).

CAUTION:

SHIPPING STRAPS ARE UNDER TENSION AND CAN 
SNAP BACK WHEN CUT.

Remove broiler from skid and place in intended location.