Lang CLG-36A-S, Installation, Operation, Maintenance, & Troubleshooting

4

IMPORTANT

READ FIRST

IMPORTANT

CAUTION:

GRIDDLE WEIGHS 405 lbs (183.71 kg).  FOR SAFE
HANDLING, INSTALLER SHOULD OBTAIN HELP AS
NEEDED, OR EMPLOY APPROPRIATE MATERIALS
HANDLING EQUIPMENT (SUCH AS A FORKLIFT,
DOLLY, OR PALLET JACK) TO REMOVE THE UNIT
FROM THE SKID AND MOVE IT TO THE PLACE OF
INSTALLATION.

CAUTION:

ANY STAND, COUNTER OR OTHER DEVICE ON
WHICH GRIDDLE WILL BE LOCATED MUST BE
DESIGNED TO SUPPORT THE WEIGHT OF THE
GRIDDLE.

CAUTION:

SHIPPING STRAPS ARE UNDER TENSION AND CAN
SNAP BACK WHEN CUT.

DANGER:

THIS APPLIANCE MUST BE GROUNDED AT THE
TERMINAL PROVIDED.  FAILURE TO GROUND THE
APPLIANCE COULD RESULT IN ELECTROCUTION
AND DEATH.

WARNING:

INSTALLATION OF THE UNIT MUST BE DONE BY
PERSONNEL QUALIFIED TO WORK WITH
ELECTRICITY.  IMPROPER INSTALLATION CAN
CAUSE INJURY TO PERSONNEL AND/OR DAMAGE
TO EQUIPMENT.  UNIT MUST BE INSTALLED IN
ACCORDANCE WITH ALL APPLICABLE CODES.

NOTICE:

The data plate is located behind the access panel in
the back of the griddle.  The griddle voltage, wattage,
serial number, wire size, and clearance specifications
are on the data plate.  This information should be
carefully read and understood before proceeding
with the installation.

NOTICE:

The installation of any components such as a vent
hood, grease extractors, fire extinguisher systems,
must conform to their applicable National, State and
locally recognized installation standards.

CAUTION:

ALWAYS KEEP THE AREA NEAR THE APPLIANCE
FREE FROM COMBUSTIBLE MATERIALS.

CAUTION:

KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN
AND DRY.  IF SPILLS OCCUR, CLEAN IMMEDIATELY,
TO AVOID THE DANGER OF SLIPS OR FALLS.