4
Enviro-ZONE
Control Panel Definitions:
Power –
On/Off button. When switched on, the control will turn on the interior light and the display.
The fan is left off until there is a call for heat or a timer is started.
When the “Power” button is pushed to turn the oven off, the interior lights turn off, the front display
turn off.
Up –
Allows you to scroll up.
Down –
Allows you to scroll down.
Cancel –
When scrolling through menus this will allow
you to back up to the previous menu. In
program mode this will allow you to back up to the
previous step.
Function Keys –
Keys are
active when a program option is
displayed on the display adjacent to that key.
Back UP Controls –
Allows oven operation utilizing a
completely separate set of manual controls.
Operation in Back -
Up Mode
is described in the
“Operation with Back Up Controls” section of this
manual.
OCE/OCG BACK-UP CONTROLS
Steam Toggle Switch
Temperature Knob
Control Toggle Switch
IL1218
OPERATION WITH BACK UP CONTROLS
During Back-Up operation, the main control panel is
disabled by removing it’s power allowing operator to
utilize a completely separate set of controls.
On both the Enviro-Zone & Enviro-Star models, the
back-up controls are located behind the Access Door
located just below the Control Panel. Inside you will
find a Temperature Control Knob, a Back-Up Control
toggle switch and a spring loaded Back-Up Steam
toggle switch.
To enable Back-Up operation, throw the Back-Up
Control toggle switch to the ON position. The oven’s
convection fan will come on at High speed / CCW and
the heat can be controlled using the Temperature Knob.
Steam may be applied
manually using the Back-Up Steam toggle switch.
Unlike normal operation, the Back-Up mode does
not employ energy saving processes or allow the
fan to reverse direction or change speeds.
POWER
PULSE STEAM
COOK-N-HOLD
1-SHOT
STEAM
FAN
HI/LOW
LED TEMP
INDICATOR
TEMP KNOB
LED TIMER
SCREEN
TIMER KNOB
BACKUP CONTROL
ACCESS DOOR
POWER
FUNCTION
KEYS
BACKUP CONTROL
ACCESS DOOR
DOWN
UP
CANCEL
ECSF back-up Controls
