background image

UL File #MH19366 

 

Rev. A2003 

27

WARRANTY 

 

Lang Manufacturing Limited 
Warranty to Commercial 
Purchasers* 

(Domestic U.S., 

Hawaii, & Canadian Sales only.) 

Lang Manufacturing Equipment (“Lang 
Equipment”) has been skillfully manufactured, 
carefully inspected and packaged to meet rigid 
standards of excellence.  Lang warrants its 
Equipment to be free from defects in material and 
workmanship for (12) twelve consecutive months, 
with the following conditions and subject to the 
following limitations. 

I.

  This parts and labor warranty is limited to Lang 

Equipment sold to the original commercial 
purchaser/users (but not original equipment 
manufacturers), at its original place of installation, 
in the continental United States, Hawaii and 
Canada. 

Quartz elements are warranted for ninety (90) 
days from the date of installation. 

II.

  Damage during shipment is to be reported to 

the carrier, is not covered under this warranty, and 
is the sole responsibility of purchaser/user.  

III.

  Lang, or an authorized service representative, 

will repair or replace, at Lang’s sole election, and 
Lang Equipment, including but not limited to, 
safety valves, gas and electric components, found 
to be defective during the warranty period.  As to 
warranty service in the territory described above, 
Lang will absorb labor and portal to portal 
transportation costs (time & mileage) for the first 
(12) twelve months from the date of installation or 
eighteen (18) months from date of shipment from 
Lang Manufacturing, which ever comes first. 

 

IV.

  

This warranty does not cover routine general 

maintenance, periodic adjustments, as specified in 
operating instructions or manuals, and consumable 
parts such as quartz elements, or labor costs incurred 
for removal of adjacent equipment or objects to gain 
access to Lang Equipment.  This warranty does not 
cover defects caused by improper installation, abuse, 
careless operation, or improper maintenance of 
equipment. 

V.

  

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU 

OF ALL OTHER WARRANTIES, EXPRESSED OR 
IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE, EACH OF WHICH IS 
HEREBY EXPRESSLY DISCLAIMED. THE REMEDIES 
DESCRIBED ABOVE ARE EXCLUSIVE AND IN NO 
EVENT SHALL LANG BE LIABLE FOR SPECIAL, 
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR 
THE BREACH OR DELAY IN PERFORMANCE OF 
THIS WARRANTY. 

VI.

  Lang Equipment is for commercial use only. If sold 

as a component of another (OEM) manufacturer’s 
equipment, or if used as a consumer product, such 
Equipment is sold AS IS and without any warranty.

 

 

 

 
 
 

Summary of Contents for G72T-JBX



























Reviews: