Lang R60S-ATA, Installation And Operation Instructions Manual

DANGER: 

THIS APPLIANCE MUST BE GROUNDED AT THE TERMINAL 
PROVIDED.  FAILURE TO GROUND THE APPLIANCE COULD RESULT IN 
ELECTROCUTION AND DEATH.

WARNING: 

INSTALLATION OF THE UNIT MUST BE DONE BY PERSONNEL QUALIFIED 
TO WORK WITH ELECTRICITY.  IMPROPER INSTALLATION CAN CAUSE 
INJURY TO PERSONNEL AND/OR DAMAGE TO EQUIPMENT.  UNIT MUST 
BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES.

NOTICE: 

The data plate is located right of range top controls and behind the circuit 
breaker door on oven. The oven voltage, wattage, serial number, wire size, 

and clearance specifications are on the data plate.  This information should 

be carefully read and understood before proceeding with the installation.

NOTICE: 

The installation of any components such as a vent hood, grease extractors, 

fire extinguisher systems, must conform to their applicable National, State 

and locally recognized installation standards.

Electrical Connection

All connections can be made through 1 3/4” hole in the bottom of the oven.
Connections should be made to the wires coming form the circuit breaker. 

WARNING: 

MAKE SURE THE MAIN POWER SUPPLY TO THE RANGE IS TURNED OFF 
AT THE SOURCE PRIOR TO CONNECTING POWER TO THE RANGE. 

The range can now be connected to power.

CAUTION:  

BE SURE THE POWER SUPPLY VOLTAGE MATCHES THE VOLTAGE 
SPECIFIED ON THE NAMEPLATE LOCATED ON THE FRONT OF THE 
RANGE. 

Total kW 

Connection

Three Phase

Single Phase

208V

240V

480V

208V

240V

L1

L2

L3

L1

L2

L3

L1

L2

L3

L1

L2

37.0

108.0

100.0

100.0

93.9

86.7

86.7

46.9

43.3

43.3

177.9

154.2

Power 

Supply

Terminal 

Block

Range 

Top

Single Phase

L1

1,3,5,7,9,

L2

2,4,6,8,10

Three Phase

L1

1,4,7,10

L2

2,5,8

L3

3,6,9

4

Installation