12
7.6
Replacing crossing symbol
Description of the crossing symbols for the visually impaired DIN
32981
1
Crossing with additional
request
2
Crossing only
(factory-fitted)
3
Crossing with central island
4
Crossing with level crossing
5
Crossing in two directions
A more detailed description of the symbols
and their functions is specified in
DIN 32981.
Fig. 15
Mounting the crossing symbol
•
Open the brackets
(2)
with the special
key
(1)
(as described in chapter 7.5).
•
Press the crossing symbol
(3)
in slightly
and click it out of place.
•
Pull the crossing symbol out completely
downwards.
Note:
The crossing symbol is spring
loaded. Catch the spring when pulling
out!
Fig. 16
•
Insert the new crossing symbol
(2)
.
•
Turn the crossing symbol into the
required direction.
Note:
The fitted spring must not fall
out!
•
Remove the special key
(1)
.
•
Release the crossing symbol and click
it back into place.
Note:
Check the built-in seal
(3)
for
correct fit.
•
Close the device again.
Fig. 17
1
2
3
4
5
2
1
3
1
2
3
