CAUTION:
•
All electrical connections must be in accordance with local and National Electrical Code
(N.E.C.) standards. If you are unfamiliar with proper electrical practices, obtain services
of a qualified electrician.
•
Turn off the main power at circuit breaker before installing fixture in order to prevent
Turn off the main power at circuit breaker before installing fixture, in order to prevent
possible shock.
•
Before cleaning fixture, turn off power and allow several minutes for the fixture to cool
down.
BEFORE YOU BEGIN:
BEFORE YOU BEGIN:
•
The OUTLET BOX described in the following section is not provided. To install this
fixture, a standard OUTLET BOX needs to be pre-installed at the selected mounting
location. Power supply wires need to be run into the OUTLET BOX, extending
approximately 6” from its opening.
If an OUTLET BOX does not exist, contact a
1. DISCONNECT POWER AT THE CIRCUIT BREAKER.
2 U i
t
i
f
li
th
h i
li k
t th
d
f th
CHAIN
Att
h th
ASSEMBLY AND INSTALLATION:
qualified electrician to have one installed.
2. Using two pairs of pliers, open the chain link at the end of the CHAIN.
Attach the
CHAIN to the TOP LOOP by hooking the OPENED CHAIN LINK to the TOP LOOP.
Using pliers, close the OPENED CHAIN LINK. (FIG. 1)
CHAIN
FIG. 1
OPENED
CHAIN
LINK
TOP
LOOP
Page 4
