OUTLET
ASSEMBLY AND INSTALLATION (CONT.):
MOUNTING
BOX
MOUNTING
BRACKET
MOUNTING
SCREWS
HEX NUT
FIG. 3
NIPPLE
SCREW
COLLAR
LOOP
NIPPLE
7. Place the CANOPY over the OUTLET BOX and check if the midpoint of the outer
threads of the SCREW COLLAR LOOP aligns with the bottom surface of the CANOPY.
OUTLET BOX
If not, turn the SCREW COLLAR LOOP until its midpoint aligns with the CANOPY. (FIG
4)
FIG. 4
CANOPY
SCREW
COLLAR
LOOP
8 Remove the CANOPY and tighten the top HEX NUT against the MOUNTING
Page 6
8. Remove the CANOPY and tighten the top HEX NUT against the MOUNTING
BRACKET. (FIG. 3)
•
Slide the THREADED RING onto the CHAIN, followed by the CANOPY. (FIG. 5)
