ASSEMBLY AND INSTALLATION (CONT.):
11. Feed the CORD and FIXTURE GROUND WIRE into the CENTER HOLE of the
SCREW COLLAR LOOP, in through the NIPPLE and out to its top end, then out of the
OUTLET BOX.
Continue feeding the CORD and FIXTURE GROUND WIRE, until
th
i
l
k
i i
(FIG 7 & 8)
there is no slack remaining. (FIG. 7 & 8)
OUTLET
BOX
FIXTURE
GROUND
WIRE
CORD
SCREW
COLLAR
LOOP
FIXTURE
GROUND
CENTER
HOLE
CORD
GROUND
WIRE
FIG. 7
FIG. 8
12. Cut off any excess CORD and FIXTURE GROUND WIRE, leaving approximately 6”
y
,
g
pp
y
extending from the OUTLET BOX.
Split apart the CORD, separating the RIBBED
WIRE and the SMOOTH WIRE. Strip off 3/8” of insulation from each wire. Loop the
FIXTURE GROUND WIRE around the GROUND SCREW.
Tighten the GROUND
SCREW against the MOUNTING BRACKET.
Make the following wire connections
(FIG. 9):
WHITE (NEUTRAL) SUPPLY WIRE
to
RIBBED FIXTURE WIRE
BLACK (HOT) SUPPLY WIRE
to
SMOOTH FIXTURE WIRE
SUPPLY GROUND WIRE
to
FIXTURE GROUND WIRE
Wrap each wire connection with 2” of electrical tape.
Carefully tuck all wire
connections into the OUTLET BOX
Page 8
connections into the OUTLET BOX.
