Assembly Instructions
Lanier R/C, INC. P.O. Box 458 Oakwood, Ga. 30566 PH 770 532 6401 © copyright 1989 Lanier R/C
20
20
Misc. Hardware
Fuel tank 10.8 oz 320cc
1
Decal Sheet
1
Instruction Booklet
1
Tools need to complete the Dart ARF
1. Drill and assorted bits
2. Hobby Knife with #11 blade
3. Masking Tape
4. T-pins or straight pins
5. Felt tipped pen/pencil
6. Rubbing alcohol
7. Paper towels
8. Phillips screwdriver
9. Allen wrenches
10. Metric tap 6mm.
11. Pliers (needle nose)
12. Mixing sticks
13. 36” yard stick or tape measure
14. Scissors
15. Moto tool with sanding drum.
Adhesives
1. Thin CA (cyanoacrylate) glue
2. Medium CA. Glue
3. CA remover/debonder
4. 5-Minute Zap Z-Epoxy
5. 30-Minute Zap Z-Epoxy
6. Zap Z-42 Thread lock
7. Zap Canopy glue.
Equipment Required
1. Four channel radio or better
2. Servos- 46in.oz. or better 5
3. 650mah battery pack or larger
4. Y-connectors
1
5. 6” extensions (Aileron) 2
8. Switch harness (your radio)
9. Motor .40 to .46
10. Prop and 2-1/4”” Spinner for your motor.
11. Fuel line (for gas or glow)
12. Pilot figure (optional)
Throttle Hardware
1. Adjustable pushrod connector
1
2. 18” 2-56 pushrod
1
3. 2-56 clevis
1
4. 5/32” nylon tube
1
5. Silicon clevis keeper
1