Loading Paper and Other Media
31
3
Loading Paper and Other Media
Loading Paper in the Paper
Tray
This section describes instructions for
loading paper whose size and feed di-
rection is already set in the standard
paper tray and optional PS440. If you
want to change the paper size or feed
direction, see P.32
“Changing the Paper
Tray Size”
.
If you want to load paper in PS420,
see P.35
“Loading Paper in PS420 (Pa-
per Feed Unit)”
. If you want to load pa-
per in Bypass Tray Type 270, see P.36
“Loading Paper in Bypass Tray Type
270”
.
Important
❒
Confirm that the setting of the pa-
per size dial matches the paper size
and feed direction of the paper in
the tray. If it does not, misfeeds or
unexpected printing results might
occur.
Reference
For more information about the
size and feed direction of paper
that can be loaded in the tray, see
P.17
“Paper Types and Sizes”
.
A
Slide the paper tray out until it
stops.
B
Align all four sides of the paper
stack, and load it into the tray.
Important
❒
Do not stack paper over the lim-
it mark.
❒
When you set thick paper in
tray 2, do not stack paper above
the lower limit mark (
A
) of tray
2.
Note
❒
To avoid paper multi-feeds,
shuffle sheets before setting
them in the tray.
❒
Load paper face up into the
tray.
C
Slide the tray into the printer un-
til it stops.
ZAEY012E
ZAEY030E
ZAEY052E
