Error & Status Messages on the Operation Panel
45
4
No Files Exist
There is no sample print file
on the printer hard disk.
To confirm whether the sam-
ple print file was sent to the
printer correctly, see P.85
“Sample Print”
.
There is no locked print file on
the printer hard disk.
To confirm whether the locked
print file was sent to the print-
er correctly, see P.88
“Locked
Print”
.
Offline
Printer is offline. The printer
cannot accept or print out da-
ta.
If you want to put the printer
online, press
{
On Line
}
.
Paper Setting
Error
The tray specified when send-
ing locked print data to the
printer is not set.
Set the tray correctly.
Power Off On
14FF
An error with the NV-RAM
has occurred.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Printing...
Printing after second the set
with the sort function.
Wait for a while.
Processing...
Print data is being processed.
Wait for a while.
Processing...
Please Wait
You have tried to print a sam-
ple print or locked print data
while the data is being written
to the printer hard disk.
Wait until the printer returns
to the ready condition.
Ready
The printer is ready for print-
ing.
—
Release
Tray Locking
The indicated tray is locked.
Unlock the indicated tray with
the operation panel.
⇒
P.99
“Job Control Menu”
Remove Misfeed
from Duplex Unit
There is a misfeed in AD380
(duplex unit).
Remove the misfed paper
from AD380 (duplex unit).
⇒
P.64
“Removing Misfed Paper”
Remove Misfeed
from Finisher
There is a misfeed in the fin-
isher.
Remove the misfed paper
from the finisher.
⇒
P.64
“Re-
moving Misfed Paper”
Remove Misfeed
from Mailbox
There is a misfeed in CS370
(mailbox).
Remove the misfed paper
from CS370 (mailbox).
⇒
P.64
“Removing Misfed Paper”
Remove Paper
From All Trays
All output trays are full.
Remove paper from output
trays.
Remove Paper
Finisher Tray
The finisher tray is full.
Remove paper from the finish-
er tray.
Messages
Description
Comments
