background image

Storing Files

54

4

C

Press 

[

OK

]

.

The search starts, and files whose
name starts with the entered string
appear.

Sending Stored Files by E-mail 
or Scan to Folder, or 
Delivering

Files stored can be sent by e-mail or
Scan to Folder, or delivered to the de-
livery server.

Note

This section explains how to select
files you want to send or deliver.
For details about sending by e-
mail, see p.17 “Procedure for Send-
ing E-mail”. Fo
r details about
sending by Scan to Folder, see p.33
“Procedure for Sending by Scan to
Folder”. Fo
r details about deliver-
ing stored files, see p.64 “Deliver-
ing Scan Files”.

When stored files are sent or deliv-
ered, scan settings cannot be
changed. The files are sent or de-
livered with the scan settings spec-
ified when they were stored.

A

Press 

[

Select Stored File

]

 to display

the list of stored files.

Reference

p.51 “Displaying the List of
Stored Files”

B

Select a file.

Note

When you select a password
protected file, the Password en-
try screen appears. After you
have entered the correct pass-
word and pressed 

[

OK

]

, the file

will be selected.

C

To select multiple files, repeat
step 

B

.

Note

For details about the maximum
number of files that can be se-
lected at once, see p.124 “Store”.

If you select multiple files, the
files will be sent or delivered in
the order they were selected.

If you press 

[

Display Selection

]

,

the selected files will be shown
in the order of delivery.

D

Press 

[

OK

]

.

The e-mail, Scan to Folder, or net-
work delivery scanner screen ap-
pears.

E

Switch the destination list if nec-
essary.

F

Specify a destination.

G

Specify the sender, subject, and
message if necessary.

H

Press the 

{

Start

}

 key.

Summary of Contents for LD225











































































































































Reviews: