3/16/2020
www.reddevilsnowblowers.com | Red Devil Snow Blowers
Page | 9
Red Devil Snow Blowers is a registered trademark of Lankota Group.
Skid Steer Hydraulic Fitting Installation
•
This snow blower comes without a set of male and female flat
face quick connect couplers. A set of fittings will need to be
purchased. Which size depends on the skid steer that will be
using this snow blower. See skid steer owners manual.
•
The hoses on the blower have
1
-
1/16”
ORB ends crimped on,
but a
1
-
1/16”
x
3/4”
adapter is included to connect smaller
coupler sets, as shown in Figure 16.
•
Use the lines below to determine which hose receives the male
and female fittings.
The blower will not function if the fittings
are backwards.
Figure 16
Figure 17
Couplers
Adapters