JUMPER SETTING AND CONNECTORS
AP-370VF/F / 6
I
NSTALLING THE
DIMM M
ODULE
:
A DIMM module simply snaps into a socket on the system board. Pin1 of the DIMM
module must correspond with Pin1 of the socket.
1. Pull the “tabs” which are at the ends of the socket to the side.
2. Position the DIMM above the socket with the “notches” in the module aligned with the
“keys” on the socket.
3. Seat the module vertically into the socket. Make sure it is completely seated. The
tabs will hold the DIMM in place.
Pin1
Notch
Key
Tab
Tab
