AWARD BIOS SETUP
~38~
LPT & COM :
When LPT & COM is “On”, any activity from one of the listed system
peripheral devices or IRQs wakes up the system.
HDD & FDD :
When HDD & FDD is “On”, any activity from one of the listed system
peripheral devices or IRQs wakes up the system.
PCI Master :
When PCI Master is “On”, any activity from one of the listed system
peripheral devices or IRQs wakes up the system.
Modem Ring Resume :
An input signal on the serial Ring Indicator (RI) line (in other
words, an incoming call on the modem) awakens the system from a soft off state.
RTC Alarm Resume :
This function is for setting date and time for your computer to boot
up. During “Disabled”, you cannot use this function. During “Enabled”, choose the
Date and Time Alarm:
Date Alarm
You can choose which month the system will boot up. Set to 0,
to boot every day.
Time Alarm
You can choose what hour, minute and second the system will
boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
Primary INTR :
When this is set to “On”, any event occurring will awaken a system which
has been powered down.
IRQs Activity Monitoring :
Item Help
Menu Level
►►►
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
Ç
È
Æ
Move Enter: /-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults
F7: Optimized Defaults