AWARD BIOS SETUP
~ 41 ~
Resource Controlled By:
The Award Plug and Play BIOS has the capacity to
automatically configure all of the boot and Plug and Play compatible devices. However,
this capability means absolutely nothing unless you are using a Plug and Play operating
system such as Windows
98. If you set this field to “Manual” choose specific resources
by going into each of the sub menu that follows this field ( a sub menu is proceded by a
“
►
”). The settings are “Auto(ESCD)”, “Manual”.
IRQ Resources:
When resources are controlled manually, assign each system interrupt
as one of the following types, depending on the type of device using the interrupt.
Item Help
Menu Level
►►►
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
[ Legacy ISA ]
[ Legacy ISA ]
[ PCI /ISA PNP]
[ Legacy ISA ]
[ PCI /ISA PNP]
[ PCI /ISA PNP]
[ PCI /ISA PNP]
[ PCI /ISA PNP]
[ PCI /ISA PNP]
[ PCI /ISA PNP]
Legacy ISA for devices
compliant with the original PC
AT bus specification, PCI/ISA
PnP for devices compliant with
the Plug and Play standard
whether designed for PCI or
ISA bus architecture.
DMA Resources :
The sub menu can let you control the DMA resource.
Item Help
Menu Level
►►►
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-7 assigned to
[ PCI /ISA PnP]
[ PCI /ISA PnP]
[ PCI /ISA PnP]
[ PCI /ISA PnP]
[ PCI /ISA PnP]
Legacy ISA for devices
compliant with the original PC
AT bus specification, PCI/ISA
PnP for devices compliant with
the Plug and Play standard
whether designed for PCI or
ISA bus architecture.
PCI/VGA Palette Snoop :
Leave this field at “Disabled”. The settings are “Enabled”,
“Disabled”.
Assign IRQ for VGA :
Enable/Disable to assign IRQ for VGA. The settings are
“Enabled”, “Disabled”.
Assign IRQ for USB :
Enable/Disable to assign IRQ for VGA. The settings are
“Enabled”, “Disabled”.
